User´s manual – RC paramotor
- 9 -
paragliders and accessories for RC paragliding www.rcparasky.com
3.4.
Attaching the canopy to the paramotor
In case you purchased the RC paramotor and canopy from our company RC para SKY, attach the canopy
to the paramotor as described here. When using a canopy from another brand, you should follow the
recommendations of the particular manufacturer.
Attach the canopy to the paramotor using karabiners so that the "A" line faces forward in the direction of
flight. Pass the brakes through the D-rings at the lower part of the riser, which is designed for the "C" line
(or "B" line - according to the canopy type - see the operational manual of RC canopy) and then tie it to
the pilot's hand. The recommended brakes length for each of our canopies is specifically described in the
operational manual for each RC canopy.
4.
TAKEOFF, MULTIPLE FLIGHT MODES AND LANDING
4.1.
The takeoff and flight phases
Always fly in the open space and make sure that there are no obstacles in the flight direction.
Grab the paramotor and lift the canopy overhead. If it's filled with air properly, you can slowly add gas on
the paramotor (never give it full throttle at this stage, there may be a situation when the pilot will
"outrun" the canopy and fall) and send the pilot to the air into the flight phase. With a slight gas
