21
XI-2.
Shifting lever
XI-2.1: Standard shifting lever
Both levers a and b always revert to the initial position after
they are pressed. The crank must always be turned when a
lever is pressed.
Operating the front derailleur shifting lever
Shifting from a small to a large chain ring
Press lever a once to move the chain from a small to a larger
chain ring.
Shifting from a large to a smaller chain ring
Press lever b once to move the chain from a large to a small-
er chain ring.
Operating the standard rear derailleur shifting lever
Shifting from a small to a larger sprocket
To shift by one gear only, push lever a to position
1. To shift by Iwo gears, push the shifting lever to position
2. You can shift a maximum of 3 gears using this method.
Shifting from a large to a smaller sprocket
Push once to shift to a smaller sprocket
When lever b is operated, there is one click where trimming
(the noise prevention mechanism) engages, and a second
stronger click when the gear shift stroke is complete. Hie
noise prevention mechanism no longer clicks once the
trimming operation is complete which means that only the
click—in positions will be heard when shifting between
sprockets.
