RBR Coda 3 D, Руководство пользователя

Страница: 10 / 13

RBR#0008817revC 10
2.4 MCBH and DB9 connectors
RBR coda
3
has an external MCBH-6-MP connector on the instrument. The data will stream to your computer via a patch
cable (ordered separately). Depending on the ordered configuration, your patch cable may have either an embedded
converter and USB connector, or a DB9-F connector.
External MCBH-6-MP connector pinout
Pin No. RS-232
1 Ground
2 Power +4.5 to +30V
3 Data output from
the instrument (Tx)
4 Data input into the
instrument (Rx)
5 N/C
6 N/C
DB9-F connector pinout
Pin No. RS-232
1 N/C
2 Data output from
the instrument (Tx)
3 Data input into the
instrument (Rx)
4 N/C
5 Ground
6-9 N/C
2.5 RS-232 cables
The RBR coda
3
sensors use RS-232 patch cables to connect to power supplies and computers. Patch cables and
underwater extension cables are sold separately and not included with the sensors. Refer to the RBR Cable Guide or
contact our support team for the list of available cables.
.
...
RBR coda
3
D with an RS-232 cable