RBP-510-RX7
Page 2 of 3 05/14/20
1300 TEMPLE AVE, CITY OF INDUSTRY CA 91746 1-800-237-7506
STEP 5- Select the Driver/Left RX7 Side Steps. With assistance, line up the Side Step to the rear faces of the
Mounting Brackets. Attach the Side Step to the Mounting Brackets with (6) 10mm Hex Bolts, (12) 10mm Flat
Washers and (6) 10mm Nylon Lock Nuts, (Figure 8). Do not tighten hardware at this time.
STEP 6-Level and adjust the Side Step and tighten all hardware.
STEP 7-Repeat Steps 1
—
6 to attach the Passenger/Right RX7 Side Step.
(Fig 1) Locate the (3) pairs of holes along
the pinch weld (Driver/Left side pictured)
Front
(Fig 2) Driver/Left side front mounting location
Pair of holes on pinch weld
Front
Threaded hole
on floor panel
(Fig 3) Attach the Driver/Left Front Mounting
Bracket to the front mounting location
(2) 6mm Hex Bolts
(4) 6mm Flat Washers
(2) 6mm Nylon Lock Nuts
8mm Hex Bolt
8mm Lock Washer
8mm Flat Washer
