background image

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS

SYDNEY  |  MELBOURNE  |  BRISBANE  |  PERTH  |  AUCKLAND

Australia   

1300 788 778   www.rba.com.au   |   

New Zealand   

0800 722 111  www.rbagroup.co.nz

1 of 4

RBA4601-011  

 

Raffaello 90° Ambulant Grab Rail, White

RBA4601-018  

 

Raffaello 90° Ambulant Grab Rail, Matte Black

RBA4601-019  

 

Raffaello 90° Ambulant Grab Rail, Chrome

RBA4601-SERIES

* RBA4600-019 shown

As improvements in the design and performance of RBA products are continuous, specifications may be subject to change without notice.

The illustrations and descriptions herein are applicable to production as of the date of this Installation Instructions Sheet. Revised 12/22 © 2022 by RBA Group II/Model RBA4601-Series/1222

Sourced/ Supplied under QMS

Содержание Raffaello RBA4601 Series

Страница 1: ...mbulant Grab Rail Matte Black RBA4601 019 Raffaello 90 Ambulant Grab Rail Chrome RBA4601 SERIES RBA4600 019 shown As improvements in the design and performance of RBA products are continuous specifications may be subject to change without notice The illustrations and descriptions herein are applicable to production as of the date of this Installation Instructions Sheet Revised 12 22 2022 by RBA Gr...

Страница 2: ...ing pads Do not use chemicals that can damage plastic Clean the surface with water and a neutral detergent rinse carefully and dry with a clean cloth If alternative cleaning methods and or chemicals are used warranty may become void Important Warnings Exceeding the maximum load values may cause permanent product damage If this happens cease use until checked by a specialised maintenance person Imp...

Страница 3: ...u New Zealand 0800 722 111 www rbagroup co nz 3 of 4 7 Straighten the rail 1 Lay rail flat with thread facing up 8 Mark location to install 2 Place bracket post onto rail 9 Check intended mounting location is level 3 Slide flange cover over post 4 Insert bolt through wall plate 5 Insert fixing wall bracket and assemble 6 Tighten ...

Страница 4: ...ww rbagroup co nz 4 of 4 10 Position flange cover so the hole is over the screw fixing point Secure the first screw 11 Rotate the flange cover so the hole is positioned over a new screw fixing point 12 Repeat until all provided screws are securing the wall plate 13 Push flange cover over wall plate and insert flange button Repeat for all other fixing points ...

Отзывы: