Version 1.1 (released 14 April 2021)
http://razorbillinstruments.com
Page 32 of 40
M
P
2
4
0
: H
IG
H
IS
O
L
A
T
IO
N
M
U
LT
IP
L
E
X
E
R
SYSTem:ERRor:COUNt?
<int>
Parameter <int>
The number of errors in the
queue.
Description
Retrieves the number of errors in
the error queue. The queue can
store at most 16 errors, if that
number is exceeded, the last error
in the queue becomes a queue
overflow error, and the other
errors are discarded.
Example
SYST:ERR:COUNT?
ROUTe commands
the route commands are used to set routes through the
multiplexer.
Select
is exclusive, and will configure all relays
so that only the specified route is set. More advanced
configurations are available the via
H
and
L
commands. All
ROUTe
commands have corresponding query forms.
ROUTe
commands are unavailable when the device is in
monitoring mode, as in this mode the relays are controlled from
the digital input port. The query forms remain available.
If a
ROUTe
command is issued when the device is in serial
monitoring mode, an error will be recorded and no action will be
taken.
