Need Help?
Visit our website at
www.razor.com
or call toll-free at
866-467-2967
Monday - Friday 8:00am - 5:00pm Pacific Time.
1
WARNING
Step 1
Step 2
Required Tools: (Not included)
A. Phillips screwdriver
B. Small Flat screwdriver
C. Long needle nose pliers
D. 3 mm Allen wrench
E. 5 mm Allen wrench
F. 36 mm wrench or a large adjustable wrench
CAUTION:
To avoid potential shock or other injury, turn power switch OFF and disconnect
charger before conducting any assembly or maintenance procedures. Failure to follow these
steps in the correct order may cause irreparable damage.
Using a Phillips screwdriver, remove the screw located at
the very front of the deck. Pull the deck cover off from the
deck.
Disconnect the throttle cable from the controller.
POWER A2
FRONT FORK - HEADSET BEARINGS
REPLACEMENT PROCEDURES
PART # W13110050026
