Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
88
Before beginning repair or maintenance:
• Read the instructions
• Disconnect charger
•
Turn the power button OFF
• Exercise caution around
exposed parts
• Contact Razor Customer
Service if unsure about any
repair or maintenance
REPAIR AND MAINTENANCE
Rear Caster Wheel Replacement
Tools Required:
Two (2) 5 mm Allen Wrenches (not included)
Rear Caster Replacement
Tools Required:
Phillips Screwdriver and 24 mm Socket Wrench (not included)
1
Turn product over. Using two (2)
5 mm Allen wrenches, loosen
coupling bolt and remove wheel
from caster.
1
Turn product over. Using a Phillips
screwdriver, remove the three (3)
screws attaching the deck plate to
the platform.
2
Insert replacement wheel
into caster.
Note:
Make sure all three (3)
spacers are aligned with the holes
in the bearings before inserting
the coupling bolt. Secure tightly
into place.
2
Turn product over. Using a 24 mm
socket wrench, loosen the nut on the
caster and remove caster.
3
Insert replacement caster. Secure in
place with nut removed in step 2. Re-
attach wheel to caster (Refer to Rear
Caster Wheel Replacement above).
4
Re-attach the deck plate to the
platform with the three (3) screws
removed in step 1.
Wheel
13-1 Coupling Bolt
13-2 Small Spacer (x2)
13-3 Bearing (x2)
13-4 Large Spacer
Caster
6-1 Locknut
6-2 Spring Washer
6-3 Flat Washer
13-1
13-2
13-3
13-4
13-1
13-2
13-3
6-1
6-2
6-3
