Page 1 of 3
12.19.13
No Light(s) on the unit
Note
Nut
10mm wrench
The longevity of the rear wheels will vary depending on
the riders weight; type of surface unit is ridden on
and/or how the unit is ridden
Loosen the 4 Phillip screws on the left side of the
motor cover and remove cover. Loosen the 3 Phillip
screws on the chain guard and remove chain guard to
gain access to the chain tensioner and chain.
Check the nut that attaches the chain tensioner to the
front fork to see if nut is too tight
If nut is already loose -
Replace Chain Tensioner
Chain Keeps Falling Off
If nut is too tight, loosen nut approx. 1/2 a turn
Check underneath frame for any damage to the foot
pedal (throttle) and/or wires
Check fuse
Clicking Noise
CRAZY CART HELPFUL TIPS
Check for object(s)/Debris caught in front wheel
