FO R G AM ER S. BY GA ME R S .
™
6
4. GETTING STARTED
CHARGING YOUR MOUSE
Plug the charging cable from your computer’s USB port to your Razer
DeathAdder V2 Pro. For best
results, please fully charge the mouse before using it for the first time. A depleted battery will be fully
charged in approximately 4 hours. This connection also acts as the wired mode for your Razer device.
The Razer DeathAdder V2 Pro requires a USB connection that can supply sufficient power to
charge the device. The charging process may be affected when connecting to a non-powered
USB hub or non-powered USB port mostly found on keyboards and peripherals.
It’s
recommended to always connect the Razer DeathAdder V2 Pro directly to the USB port of your
computer.
LOW POWER INDICATOR
The Razer logo will blink red twice in repeated intervals to indicate that its
battery’s power is less than
5%. This lighting sequence will repeat until the battery is drained or the mouse is connected to the PC
via the charging cable.
Содержание DEATHADDER V2 PRO
Страница 1: ...RAZER DEATHADDER V2 PRO MASTER GUIDE...