Razberi V8, Руководство пользователя и руководство по началу работы, Страница: 61 / 113

Rack Mounting Instructions 60
1. Installing and Removing Tool-less Rails (Square Hole or Round Hole Racks)
Position the left and right rail end pieces labeled FRONT facing inward and orient each end
piece to seat in the holes on the front side of the vertical rack flanges (1). Align each end
piece in the bottom and top holes of the desired U spaces (2). Engage the back end of the
rail until it fully seats on the vertical rack flange, and the latch clicks into place. Repeat
these steps to position and seat the front end piece on the vertical rack flange (3). To
remove the rails, pull the latch release button on the end piece midpoint and unseat each
rail (4).
Figure 53. Installing and Removing Tool-Less Rails