Raytheon Pathfinder ECDIS, Руководство оператора, Страница: 259 / 370

Operator Manual
Raytheon Anschütz GmbH
Germany
R
ECDIS
8 − 31
3655DOC020102 Edition: 30.MAR.2007
Table 8 − 2 Waypoint List Column Definitions
Column Contains
Waypoint Num The waypoints numerical position in the route.
Waypoint Label Waypoints label.
Latitude
Waypoints latitude.
Longitude Waypoints longitude.
Plan Spd Planned speed for the route leg (e.g. from waypoint 1 to waypoint 2)
Brg Next Bearing from that waypoint to the next waypoint.
Dist. Next Distance between that waypoint and the next waypoint.
Dist. Made Distance traveled so far. This is continually updated.
Dist. to Go The route distance to the last waypoint in the route from the current ship
position.
TTG Time to Go; the time needed at the current speed to reach the next waypoint.
At the bottom of the window, ECDIS displays the current ship’s position and the
bearing and range to the active waypoint.
An asterisk marks the active waypoint.
8.2.7 Clearing Routes from the Display
When you have finished navigating a route, you can clear it from the display
using the Clear Route command. Be sure to save a new or updated route before
using this command. This command does not delete the route from the route list,
it only removes the route from the display.
Procedure: (see chapter 8.2.1.1)