Raytheon Anschütz eLog, Руководство по обслуживанию

Страница: 28 / 50

3 Configuration & Maintenance
10000000584 18 Edition:002
► Tab. 3: Ship Network Settings
Element Description
Use DHCP The device uses DHCP to dynamically obtain an IP
address in the ship network. This is the default behav-
ior.
IP address If DHCP is not in use, this is the IP address of the de-
vice in the ship network. Please select a unique IP,
which is different from the IP address in the
LWE
net-
work.
Subnet mask If DHCP is not in use, this is the subnet mask of the
ship network. The default value is
255.255.255.0
.
Gateway If DHCP is not in use, this is the IP address of the
gateway which connects the ship network to the Inter-
net.
Activate Use of Internet If deactivated (not advised), the eLog device will not
attempt to connect to the logbook cloud services for
cloud-based storage of logbook data or download of
software updates.
4.
Select the softkey Safe .
► The device reboots.
5. Close the browser window.
► After approximately 3 minutes the electronic logbook can be used again. The
changed settings are now active.
3.1.2 Configure LWE Network
Requirements
• You must be logged in as an administrator.
About this task
The eLog is able to send logbook data to the VDR and alerts to the CAM-HMI via IEC
61162-450 Ed. 2 communication on
ethernet port 0
.
Procedure
1. Select the softkey LWE Network in the Gateway Configuration menu, see Fig. 10 .
► The menu
LWE Network
opens.