RayTek LineScanner MP150, Руководство по протоколу

Страница: 16 / 42

Transmission of Temperature Lines
16
Rev. B4 Aug 2019
MP150 Protocol
•
[snapshot/line counter]: counts the lines in burst mode and the snapshots in snapshot mode
•
[background temperature / voltage input]: If background temperature compensation via
voltage input is configured then it contains the background temperature (as integer in °C)
calculated from the voltage, otherwise it contains the voltage.
•
[error bits]: error bits (see section 3.4 Error Handling , page 11)
4.4.6.3 Line Mode 13
hex
LM = 13
hex
extends LineMode 11
hex
in the traditional field [Sectorinfos]. The first 6 bytes remain as in
Line LineMode 11
hex,
they get extended by additional bytes:
Sectorinfos =
2 Bytes for snapshot/line counter
2 Bytes for background temperature / voltage input
2 Bytes for error bits
(see section 3.4 Error Handling , page 11)
2 Bytes for result sector/zone 0
2 Bytes for result sector/zone 1
2 Bytes for result sector/zone 2
2 Bytes for result sector/zone 3
2 Bytes for result sector/zone 4
2 Bytes for result sector/zone 5
2 Bytes for result sector/zone 6
2 Bytes for result sector/zone 7
2 Bytes for result sector/zone 8
2 Bytes for result sector/zone 9
•
[snapshot/line counter]: counts the lines in burst mode and the snapshots in snapshot mode
•
[background temperature / voltage input]: If background temperature compensation via
voltage input is configured then it contains the background temperature (as integer in °C)
calculated from the voltage, otherwise it contains the voltage.
•
[error bits]: error bits (see section 3.4 Error Handling , page 11)
•
[result sector/zone N]: temperature that was calculated in the zone/sector, the format is define
by the data mode (
DM
) command