The following screen will appear.
The user can Select “Store” or “Print” at
anytime that the system is measuring.
After the user Selects and presses “Stop”.
The test sequence will halt.
The user has the option to:
•
“GO” : Start another test.
•
“Store” : allows to save a reading into a
memory location (Archive).
•
“Print” : allows to go to the print screen.
•
“Mode” : Select another test mode.
•
“Setup” allows to go to the Range
Selection screen.
12.2.3 Auto
Selection of “Auto” allows a number of tests
to be made then automatically.
The system automatically detects when
contact is made to the device under test
and begins and ends the measurement.
The data is automatically saved.
For this type of measurement, please use
the optional Kelvin probes.
The system prompts the operator to “Make
Contact ” to the device under test. The
system automatically detects when the
contact is made to the device under test
and begins the measurement sequence.
90081-2.11 Micro Junior 2
Page 33 of 44
