8 System Details
8.1 Battery check
The instrument is battery operated. Before operating the Micro Junior 2, check the battery indicator
located on the upper left hand of the display. The Battery indicator will give a good indication of the
battery charge. A full Charge will allow the Micro Junior 2 to operate continuously for 5 Hours at 10-
ampere output or (typically) a month of daily usage. Recharge the batteries at any time. The
system can be operated while charger is plugged into the mains power (100 to 250 VAC 50 / 60
Hz, automatic ranging).
8.2 Li-Ion Charger
Ext. power Unit 100 to 250 VAC 50/60 Hz, automatic ranging.
8.2.1 Precautions
•
This charger is for indoor use only. Do not expose to water or dust.
•
To avoid overheating, the charger must not be covered while in use.
•
This charger is designed for use with Lithium-Ion Batteries installed in the
Raytech Micro Junior 2 only.
•
The mains outlet must be easily accessible. Should a faulty Condition occur: remove the
plug from the mains outlet immediately.
8.2.2 Features
•
3-step charge control for safe, fast charging of Lithium-Ion Batteries.
•
One voltage level: Quick bulk charge.
•
LED-indicator with three different colors show the charge status.
•
Built in timer for prolonged charging.
90081-2.11 Micro Junior 2
Page 15 of 44
HIGH VOLTAGE !
HIGH VOLTAGE !
Do not remove cover! There are no user serviceable components inside.
