UK/Europe Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
Toll Free: +1 888 505 8335
17
Illuminator Beam Angle Adjustment
17.1
Beam Angle of Illuminators – Changing the Lens Insert
Each Illuminator is factory set and supplied with 35° ILS (Interchangeable
lens System) . To alter the
beam angle to 10°, simply remove the ILS as detailed below. ILS inserts for 60° are supplied with the
unit.
Alternative 80° and 120
°
are available to order.
All ILS lenses will be clearly marked with the angle which they will produce when inserted into the lamp.
Please handle ILS lenses with care – and do not touch optical film. Only 1 ILS lens can be inserted into
each illuminator at any time.
We would recommend that power is turned off when replacing ILS lenses.
Remove base plates of one or both illuminators using 2.5mm Allen/hex key.
Insert required ILS lens and re-attach base plate firmly ensuring gasket is correctly located.
IMPORTANT NOTE
: Ensure base plate is securely located, the gasket is correctly located and the screws
correctly fastened to ensure and maintain IP66 rating of the product
Lens Insert
