Raytec VAR2 IPPOE i4-1, Полное руководство по установке и настройке, Страница: 15 / 64

15
The External Input will activate the illuminator at 100% (NOT soft start) for the
duration of the input provided the photocell detects it is dark.
External Output: activated by photocell and will become short circuit when active.
Factory Defaults
Name VARIO2 IP
Group Name
<<Deliberately Left Blank>>
IP Address 192.168.2.80
Enable DHCP Checkbox
Not Selected – IP addresses will NOT be automatically
allocated. If illuminator is being operated on a DHCP enabled
network, DHCP can be selected for automatic allocation of IP
address.
Illuminator Mode
Local:
Control the illuminator using the web interface.
Illuminator will respond to its own photocell and telemetry
events.
Photocell External Input
Trigger Control Illuminator Control Illuminator Control
Respond to Group
Commands
No, ignore group
command
No, ignore group
command
Illuminator Mode on
Trigger
On On
Power (%) 100% 100%
Duration All night Duration of Input
Soft Start
On Off
Deterrent
Pattern = SOS
Frequency = Slow