manualshive.com logo in svg

Raypak TempTracker mod+ Hybrid, Инструкция по установке и эксплуатации

Поделиться
Скачать
Raypak TempTracker mod+ Hybrid Скачать руководство пользователя страница 8

8 

Raypak, Inc.

HTC# 059105-00D

Features

The TempTracker  mod+  Hybrid  has  been  designed  with  Hydronic  building  heating,  using  both  condensing  and  non-condensing 

boilers, as the primary purpose.  As well, it is capable of controlling modulating or staging boilers.  With this in mind, many of the 

TempTracker mod+ Hybrid features can be utilized to ease, enhance, and improve your system performance.

condensing and non-condensing Boilers can be Modulating or Multi-stage.

The TempTracker mod+ Hybrid can operate both modulating and staging boilers.  Just specify each of the Condensing and Non-Condensing 

boiler group type and the TempTracker mod+ Hybrid will activate the groups based on an adjustable set of criteria.

pId type logic 

The TempTracker mod+ Hybrid's control algorithms allow it to look at the rate of change in the system.  If the system temperature is 

changing quickly, the TempTracker mod+ Hybrid will react quickly to adjust the modulating stages’ output.  If the system temperature 

changes slowly, the TempTracker mod+ Hybrid will make slow and gradual output adjustments. Therefore, the TempTracker mod+ Hybrid 

adapts to specific system requirements and minimizes fluctuations around the set point.

controls 0-10 V or 4-20 ma modulating Burners

Whenever any of the Condensing or Non-Condensing group type is set to Modulating, the TempTracker mod+ Hybrid will accurately control 

the output from 0 to 100% of modulation for each of these different types of motors.  Moreover, a single TempTracker mod+ Hybrid can 

control multiple modulating burners each with a different modulating signal.

controls on/off, 2-stage, 3-stage, or 4-stage Burners

Whenever one of the Condensing or Non-Condensing group Type is set to Staging, the TempTracker mod+ Hybrid will accurately 

sequence the stages using a PID logic.  The sequencing group will have a set of adjustable parameters to help achieve better operation.

digital display of all system settings

The TempTracker mod+ Hybrid’s alphanumeric digital display names each system parameter in simple English and shows its precise 

value. The easy to follow menu system allows users to quickly make changes to any system setting without having to learn any specialized 

codes or keyboard commands.

automatic rotation among stages

Rotating the lead stage of each group promotes even wear. The TempTracker mod+ Hybrid has three modes of rotation: Manual, Last 

On, or Time.  The Time rotates the lead stage every selected time period from every hour to every 60 days.

outdoor reset

The TempTracker mod+ Hybrid has a hydronic outdoor temperature reset function.  This allows the TempTracker mod+ Hybrid to change 

the set point based on outdoor temperature.  Furthermore, additional settings have been added to fine tune this operation, like Offset, 

Minimum, and Maximum Water Temperature and night setback schedule.

system output

This output can be used to activate a system pump, combustion air damper, or perform any other function that is required when any stage 

is active.  It will energize whenever the outdoor temperature is below the Outdoor Cutoff setting.  A System Prove input checks the status 

of components activated by the System output before stages can be activated.

normal or parallel Modulation

The TempTracker mod+ Hybrid can stage modulating boilers as needed.  In Normal Modulation, it will allow the modulation to increase 

on the lead boiler until it reaches its modulation start point adjustment.  Then, the TempTracker mod+ Hybrid will start the next boiler 

and so on.  Moreover, the TempTracker mod+ Hybrid allows for a parallel mode that can modulate several boilers together as a one large 

boiler.  This mode is useful when used with condensing boilers as they run more efficient at lower modulation.  Thus, it is better to run 

several boilers at lower modulation than to run a single boiler at full fire.

add up to 16 Boiler stages (optional)

As a stand-alone, the TempTracker mod+ Hybrid is designed to control four stages.  However, it has the capability of expanding its control 

to two extension panels each with six boiler stages.  Thus, the TempTracker mod+ Hybrid can control a total of up to 16 boiler stages.

Содержание TempTracker mod+ Hybrid

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды