background image

2

While your unit is being installed by your professional and 

licensed installer of choice, please take this opportunity to 

quickly register your unit. With the necessary information 

in  hand,  registering  your  new  heat  pump  pool  heater 

only takes a few moments and is the best way to ensure 

efficient warranty support during the period of time the 

unit is covered by warranty protection.

See 

Figure 1 

at  the  bottom  of  the  page  to  locate  and 

record  your  model  and  serial  number.  Once  you  have 

done this, please make sure you also have the following 

information on hand:

• 

Name,  phone  number,  and  email  address  of 

homeowner

• 

Physical address of where the unit is installed; please 

include any ‘subdivision’ or similar information

• 

Any  service  challenges  present  at  the  house/

neighborhood:  gated  community,  locked  access  at 

house, guard dog, etc.

• 

Date of installation of the new unit

• 

Name  and  phone  number  of  the  professional  and 

licensed entity that performed the installation for you

With all of the above information in hand, please contact 

us and ask to register your brand new heat pump or do 

it online at:

 

http://warranty.raypak.com

 

(800)-260-2758 M-F 8:30 - 4:30 EST

You will be given a Warranty Registration Confirmation 

number which you should notate and keep in one location 

along  with  your  Installation  and  Operation  Manual,  a 

copy of your warranty (provided with your manual) and 

the above information.

Warranty Registration Confirmation #:

ATTENTION: Please Take This Opportunity to Quickly Register Your Unit

This would also be a good time to review both the manual 

and the warranty so that you are aware of how to correctly 

operate your new equipment as well as how to keep from 

voiding any aspects of your warranty. During the life of 

your unit, please feel free to use the phone number on 

the last page below to contact us with any questions you 

may have about operation, warranty, and/or service.
Thank  you  very  much  choosing  us  to  satisfy  your  pool 

heating needs.

0000000000000000

NAME PLATE

BARCODE

SERIAL NUMBER

F10759

For location of this label on your unit, see 

Figure 8

Figure 1.  Model and Serial Number Information

6100.64_Crosswind.indd   2

11/26/2019   4:16:40 PM

Содержание CROSSWIND Series





























Отзывы: