Made in China
Version 1.2
- 02 -
Chapter 2 POWER SUPPLY MODE
There are 4 power supply to power the radio:
1. Micro USB Adapter Charging
(1) Connect the USB cable (included) to a regular AC power adapter (not
included).
(2) Plug the USB cable into the Micro USB port of the radio.
(3) Plug the AC adapter into a standard 110-220V outlet.
A 5V/2A AC power adapter is highly recommended.
2. Hand Crank Charging
Unfold the crank handle and rotate it in either direction (generating
350mA of current) for approximately 7 hours to fully charge the
flashlight.
Note: Rotate the crank handle at 2 revolutions per second and it will produce 300-
350mA of power.
3. Solar Panel Charging
The solar panel can be charged by placing it in the sunlight (do not charge
indoors)
Note: Solar panel charging will produce about 30-50mA of current, it is
difficult to fill the flashlight, mostly used to maintain the
rechargeable battery.
4. Rechargeable Lithium Polymer Battery
- 01 -
Chapter 1 LOCATION OF CONTROLS
CR1020
Emergency Alert Radio
with AM/FM/NOAA weather/F
lashlight
CR1020 meets the NWS evaluation criteria for NWR All Hazards logo use
1. Flashlight
2. Light Control Button
3. Telescopic Antenna
4. Reading Lamp
5. Solar Panel
6. Battery Status Indicator
7. Radio Rotating Disk
8. Speaker
9. Crank Handle
10. DC Charging Jack
11. USB Output Charging Jack
12. AM/FM/WB Selector
13. Radio Switch & Volume
Adjustment Gear
13
12
10
9
11
1
3
2
4
5
6
7
8
2
3
1
VOL
ON
OFF
AM
FM
WB
Contact our experts
https://www.raynic.com
