RAYN Installation Guide
Lamp Head and LED Driver
Electrical
Note:
Installation must follow all national and local codes for electrical
equipment.
WARNING:
RISK OF ELECTRIC SHOCK! Circuits that are
installed without an accessible power disconnect device cannot
be serviced or operated safely.
AVERTISSEMENT :
RISQUE DE DÉCHARGE ÉLECTRIQUE! Il
est imprudent d'utiliser ou de réparer les circuits installés sans
qu'un dispositif de déconnexion de l'alimentation ne soit
accessible.
LED Driver
100-277 VAC, 50/60 Hz input
•
The LED driver is a UL Class I apparatus. This equipment must be grounded.
•
The LED driver is provided with a suitable power input cable. The power input
cable is available with bare ends (US or IEC models available) or with a regional
specific connector.
Lyda Lamp Head
Power is supplied directly from the provided LED driver using the specialized lamp
cable provided.
Class II, SELV, 60 VDC maximum, 220 W maximum, 4.2 A maximum.
Note:
For use with the approved power source only.
Lamp Head and LED Driver
Page 3 of 8
RAYN
