Raymarine ST60 Tridata, Руководство пользователя

Страница: 13 / 54

Chapter 1: Operation 1
Chapter 1: Operation
1.1 Getting started
Displayed information
Your ST60 Speed instrument provides the following:
• Speed information.
• Log, trip and water temperature information.
• Count-up and race-start timers.
CAUTION:Calibration requirement
The ST60 Speed instrument is calibrated to default settings when
supplied. To ensure optimum performance on your boat, this
product MUST be calibrated before use. Do NOT use the product
until it has been calibrated using the procedures in Chapter 4,
Calibration.
1.2 Normal operation
Use the flow charts in this Chapter to operate your ST60 Speed
instrument. The flow charts show the sequence of key presses and
displays for the various operating tasks. All key presses are momentary
unless otherwise stated.
Speed information
The
speed
key gives access to current speed, maximum speed, average
speed, velocity made good (
VMG
) and speed over ground (
SOG
)
information. Refer to the Using speed key flow diagram to access the
information you want.
Current speed
Speed measurement units can be either knots (
KTS
), miles per hour (
MPH
)
or kilometres per hour (
KMH
). The required units are selected during user
calibration (see Chapter 4, Calibration ).
PDF test 81037_4.book Page 1 Friday, July 26, 2002 11:08 AM