Raymarine RSW-Wired, Руководство по установке

Страница: 49 / 74

14.3 LED diagnostic guidance
Your product has diagnostic LEDs which can be used to identify the unit’s
status and to help troubleshoot any potential issues that may occur.
The following section provides two basic examples of how to interpret the
LED diagnostic patterns included in this publication.
Example solid LED diagnostic pattern:
1. LED ON — Indicates the color assigned to the unit’s diagnostic LED, and
confirms that the diagnostic LED is active (switched on ).
2. LED OFF — Indicates that the unit’s diagnostic LED is inactive (switched
off ).
3. Diagnostic pattern — Indicates a diagnostic pattern based on the
number and duration of peaks (indicating LED is switched on ) and
troughs (indicating LED is switched off ) generated within the duration of
the diagnostic pattern. In the example shown, a continuous peak occurs,
indicating that the LED is permanently
on .
Example flashing LED diagnostic pattern:
1. LED ON — Indicates the color assigned to the unit’s diagnostic LED, and
confirms that the diagnostic LED is active (switched on ).
2. LED OFF — Indicates that the unit’s diagnostic LED is inactive (switched
off ).
3. Diagnostic pattern — Indicates a diagnostic pattern based on the
number and duration of peaks (indicating LED is switched on ) and
troughs (indicating LED is switched off ) generated within the duration
of the diagnostic pattern. In the example shown, a peak followed by a
trough occurs and then repeats again, indicating that the LED flashes
twice within a period of one second.
4. Diagnostic pattern duration — Indicates the total duration of the
diagnostic pattern.
5. Diagnostic pattern flash total — Indicates the total number of flashes
that occur within the diagnostic pattern.
Troubleshooting
49