4.7 NMEA 0183 connection
The NMEA 0183 wires can be used to connect the unit to a NMEA 0183 GNSS (GPS) receiver or MFD.
1.
Yellow = Receive positive (+) wire
2. Green = Receive negative (-) wire
3.
White = Transmit positive (+) wire
4.
Brown = Transmit negative (-) wire
The NMEA wires should be connected to a compatible device as shown in the table below:
NMEA 0183 wires
NMEA 0183 device
Receive positive (+)
to
Transmit positive (+)
Receive negative (-)
to
Transmit negative (-)
Transmit positive (+)
to
Receive positive (+)
Transmit negative (-)
to
Receive negative (-)
57
