Raymarine RAY91 VHF, Инструкция по установке и эксплуатации

Страница: 75 / 168

5.10 Selecting a network type
When connecting your radio to other devices it is important to ensure you select the network
connection and type that you want data to be transmitted over.
From the Main menu:
1. Select
Set-up .
2. Select Network output .
The following network types are available:
• NMEA 2000 (default)
• 0183 High speed
• 0183 Std speed
3. Select the network type relevant to the devices connected to your radio. If your radio is not
connected to any other devices any option can be selected.
Selecting 0183 Std speed will disable the built-in AIS receiver, where applicable.
The Network output setting determines the baud rate of the NMEA 0183 input:
Network output setting NMEA 0183 input baud rate
NMEA 2000 Standard speed (4,800)
NMEA 0183 High Speed High speed (38,400)
NMEA 0183 Standard Speed Standard speed (4,800)
5.11 Entering your MMSI number
To program your radio with your MMSI number follow the steps below.
From the Set-up menu: ( Menu > Set-up )
1. Select DSC set-up .
2. Select MMSI .
The MMSI required message will be displayed if no MMSI number has been set.
Getting started
75