Raymarine RAY63, Инструкция по установке и эксплуатации

Страница: 83 / 208

The Fistmic must NOT be used to create a second station, as the operator will not have access to all
Radio functions or the information displayed on the Radio’s LCD screen.
8.6 Secondary handset station (Ray63 / Ray73 only)
The Raymic handset accessory can be connected to the Secondary station connector located on the
rear of the radio, this will create a second fully functional station.
1. Primary station (Radio base station)
2. Handset extension cable (A80290, A80291 or A80292)
3. Secondary station handset (A80289)
4. Panel mount fixings kit (R70438)
5. Handset adaptor cable with RCA audio (A80297)
6. Primary station passive speaker (A80542)
7. Secondary station passive speaker (A80542)
The Fistmic must NOT be used to create a second station, as the operator will not have access to all
Radio functions or the information displayed on the Radio’s LCD screen.
Wired handset extension cables
Handset station cabling can be extended using approved extension cables.
The maximum length of cable from the Handset to the Base station should not exceed 50 m (164 ft)
Cables and connections 83