10.1 Performing a system reset
Note:
Performing a reset will not reset MMSI and ATIS ID number.
From the Maintenance menu:
Menu > Set-up > Maintenance
.
1. Select
System reset
.
2. Select
Yes
.
The system is now reset to factory defaults.
Note:
Performing the reset will delete all contacts in your phonebook and reset all user options.
System test
The system test menu can be used to show the status of the system and connected devices.
The System test menu show the status of the following system components and connected devices:
• GPS
• DSC
• Battery
• Hailer
• Remote handset
•
OK
is displayed next to each item that is either connected or enabled
•
No
is displayed next to items that are either not connected or disabled.
10.2 LED diagnostics — Ray90 / Ray91 Base station
Sequence
Color
Status
Green
• SeaTalkng ®Bus healthy, no
communication faults.
• All modules ready (GPS, VHF,
AIS).
Red
• SeaTalkng ® Bus not
connected.
• NMEA 0183 not connected.
Red
• Connected but not receiving
data.
Green
• VHF transceiver module
initializing / not ready.
Green
• GNSS (GPS) sensor
initializing / not ready.
Red
• Internal fault (No GNSS (GPS)
signal, No antenna, lost
signal).
38
