24
Ray49 Marine VHF Radio
4. UP/DOWN
Use the arrow keys to change the active channel number. Press and hold for rapid
channel changing. Can also be used to scroll through selections in menu and
programming modes.
5. SCAN / SAVE
Press and release this key to access the Scan Mode menu, which is described on
page 37. If Scan Mode is active, pressing this key terminates the scan. Press and
hold for 3 seconds to enter a channel into the radio’s memory. This function is
described in “Saving Channels to Memory“ on page 42.
Transceiver Controls
6. CH/OK
Rotate this knob to change the current channel number and to change values in
Menu mode or during programming (CH). Press in to enter values selected in
Menu mode or during programming (OK).
7. PWR/VOL
Use this knob to turn the radio ON and OFF and to set the volume.
8. SQ
Use this knob to set the squelch threshold, which cuts off the receiver when the
signal is too weak for reception of anything but noise.
Transceiver Push Keys
9. MENU/DSC
Press and release this key to select Menu Mode, which is used to set up the radio.
Menu operations are fully described in Chapter 4.
Press and hold for 3 seconds to enter DSC Call Mode, which is used for making
DSC Calls and viewing the DSC Call Logs and the DSC Call Phonebook.
A Maritime Mobile Service Identity (MMSI) number is required to operate the DSC
equipment in this radio. This number directs DSC calls directly to your radio, much
like a telephone number. You can program the MMSI number yourself one time
only using the operation described in “My MMSI ID“ on page 82. Otherwise, your
Raymarine dealer can program or change the number for you.
Full details on DSC call operation are described in Chapter 5.
Содержание Ray49
Страница 1: ...Ray49 Marine VHF Radio Owner s Handbook Document number 81296 1 Date June 2007...
Страница 8: ...8 Ray49 Marine VHF Radio...
Страница 34: ...34 Ray49 Marine VHF Radio...
Страница 112: ...112 Ray49 Marine VHF Radio...