Raymarine Ray 90, Инструкция по установке и эксплуатации

Страница: 25 / 192

2.8 Software updates
Raymarine periodically releases software updates for its products. These updates can provide new
and enhanced features and also improve product performance and usability. You should ensure that
you have the latest software for your products by regularly checking the website for new software.
The software update process requires a compatible MFD powered by LightHouse™ 2 release 13.37 or
above, or LightHouse™ 3 version LH3.2 or above.
Check the Raymarine website regularly for software updates for your products:
www.raymarine.com/software .
• The MFD used to perform the software update must be the designated Data master and be
connected / networked to the product being updated.
• Please refer to the operation instructions for your MFD / operating system version for details on
how to perform the software update, alternatively refer to the instructions provided on the software
download area for your product on the Raymarine website:
ww.raymarine.com/software .
• If you are in any doubt as to the correct procedure for updating your product software, please refer
to your local authorized dealer or Raymarine technical support for assistance.
Caution: Installing software updates
The software update process is carried out at your own risk. Before initiating the
update process ensure you have backed up any important files.
Ensure that the unit has a reliable power supply and that the update process
is not interrupted.
Damage caused by incomplete updates are not covered by Raymarine warranty.
By downloading the software update package, you agree to these terms.
Checking software versions
You can check the software version of your radio and connected components.
From the Homescreen:
1. Select
Menu > Set-up > Maintenance > About this unit .
2. Scroll down.
Software versions of connected components are displayed.
Performing software updates — Raymic handset
If your wired handset is running software version V1.32 or above then the handset will be updated
automatically at the same time as the Base station. If you handset is running a software version below
V1.32 then your Base station and handset must be updated separately.
• The radio must be connected to a compatible MFD over SeaTalkng ®.
• The Data master MFD must be used to perform software update.
• Once you have updated your Base station software follow the steps below to update your handset.
1. Ensure a memory card that contains the necessary software files is inserted into the card reader
of your MFD.
2. With the Radio’s Base station powered on, turn off the Raymic Handset by pressing the Power
button located on the top of the Handset.
3. Press and hold the Distress and PTT buttons on the Handset.
4. Press the Handset Power button for 1 second, until the backlight turns on, and then release all
three buttons.
The Handset is now in update mode.
5. Now check for software updates using your MFD:
• LightHouse™ 2 — From the Homescreen select: Set-up > Maintenance > Check Card for
Updates .
• LightHouse™ 3 — From the Homescreen select: Settings > Updated software > Check SD card .
6. Select your Radio and select Update .
(The LCD backlight will flash when the update is in progress.)
Document and product information
25