Raymarine Ray 90, Инструкция по установке и эксплуатации

Страница: 31 / 107

4.7 NMEA 0183 connection
The NMEA 0183 wires can be used to connect the unit
to a NMEA 0183 GNSS (GPS) receiver or MFD.
1. Yellow = Receive positive (+) wire
2. Green = Receive negative (-) wire
3. White = Transmit positive (+) wire
4. Brown = Transmit negative (-) wire
The NMEA wires should be connected to a compatible
device as shown in the table below:
NMEA 0183 wires
NMEA 0183
device
Receive positive (+)
to
Transmit positive
(+)
Receive negative (-)
to
Transmit negative
(-)
Transmit positive (+)
to Receive positive
(+)
Transmit negative (-)
to
Receive negative
(-)
4.8 Loud hailer connection
A Loud hailer (M95435) can be connected to the radio
using the loud hailer wires.
1 Positive (+) hailer wire (Purple)
2 Negative (-) hailer wire (Gray)
Cables and connections 31
81377-1-en_US_PRINT.pdf 31 12/21/2017 9:05:37 PM