Adjusting the waypoint arrival alarm
The waypoint arrival alarm is enabled by default. The waypoint arrival alarm
creates a virtual circle, of the specified radius, around the destination point.
When your vessel reaches the virtual circle the alarm is triggered.
From the homescreen:
1. Select
[Settings]
.
2. Select the
[Alarms]
tab.
3. Select the
[Arrival radius:]
setting field.
4. Adjust the distance to the desired value.
5. Press the
[Back]
button to return to the alarms menu.
Note:
The waypoint arrival alarm can be disabled or enabled using the
[Waypoint
arrival:]
toggle switch.
Restarting cross track error (XTE)
A cross track error (XTE) occurs when your actual route diverges from your
original planned route. Restarting XTE plots a new course directly from
your current position to your destination, rather than continuing to follow
the original planned route.
1. Select
[Restart XTE]
from the
[Navigation]
menu:
[Menu > Navigation
> Restart XTE]
.
Following a Route
Follow the steps below to navigate a saved route.
From the Chart app, with the route displayed onscreen:
1. Select a route leg.
The route context menu is displayed.
2. Select
[Follow route]
to follow the route from start to finish.
Alternatively you can select Follow route from the route pop-over menu,
accessed from the Routes menu.
[Menu > Routes & Tracks > Routes > <Route
name> > Follow]
.
For more information on routes and route management refer to:
Following a route from a specified waypoint
You can start following a route from any waypoint in that route.
From the Chart app, with the route displayed onscreen:
1. Select the waypoint that you want to start following your route from.
The route context menu is displayed.
2. Select
[more options]
3. Select
[Follow from here]
.
78
