Raymarine LIGHTHOUSE SPORT 3.18, Руководство по эксплуатации, Страница: 35 / 162

passphrase page. The passphrase can also be changed from the same
page.
5. The display’s Wi-Fi network channel can be viewed from the Wi-Fi
settings tab and can be changed by selecting the channel field.
Connecting an Android device to the display
Android devices can be connected to the display’s Wi-Fi connection.
Open your Android device’s Wi-Fi settings from the top drop down menu or
via the
[Settings] icon.
Example Android Wi-Fi connection
Note:
Depending on device type, manufacturer and version of the Android
operating system in use, screens and options may be different than in
the example above.
1. Enable Wi-Fi by setting the toggle to on (blue) and select your MFD from
the available networks.
2. Enter your MFD’s Wi-Fi passphrase and select [Connect] .
Make sure the password you enter is case sensitive.
3. When your Android device is connected to your MFD’s Wi-Fi it will display
connected under the MFD’s name.
For troubleshooting advice refer to the Wi-Fi troubleshooting information on
the Troubleshooting chapter
p.133 — Troubleshooting
Connecting an iOS device to the display
iOS devices can be connected to the display’s Wi-Fi connection.
Open your iOS device’s Wi-Fi settings from the top drop down menu or via
[Settings] .
Note:
Depending on device type, and iOS version in use, screens and options
may be different than in the example above.
1. Enable Wi-Fi by setting the toggle to on (green) and select your MFD
from the available networks.
2. Enter your MFD’s Wi-Fi passphrase and select join.
Make sure the password you enter is case sensitive.
Set up
35