Raymarine LIGHTHOUSE 4, Руководство по эксплуатации

Страница: 90 / 504

1. Estimated fuel remaining
2. [Set all tanks full] — Select when you have filled up all tanks.
3. [Add partial fuel fill] — Select to enter a specific volume of fuel during a
partial tank fill.
Note: If you enter the wrong amount of fuel this can be corrected by
entering a minus value as a partial fuel fill, this will reduce the total
amount of fuel remaining by the amount entered.
4. Trip (Manual) — accumulates data until reset.
5. Trip (Day) — resets automatically when local time passes midnight.
6. Trip (Month) — resets automatically on the 1st day of the month.
7. Trip (Season) — accumulates data until reset.
8. [Reset trip] — The [Trip (Manual)] and [Trip (Season)] logs can be reset by
selecting the relevant [Reset Trip] button.
Note:
• The Fuel manager estimates the amount of fuel remaining onboard
based on logging each time you fill up, your vessel’s total fuel capacity,
and how much fuel is burned by your engine(s). Incorrect entries will
affect the fuel calculations which could result in a shortage of fuel.
• The Fuel remaining calculation is an estimate and will be inaccurate if
fuel fills are not entered, entered incorrectly, or if fuel is used by other
sources (e.g.: generators).
• Distance to Empty and Time to Empty values are based on estimated
fuel remaining calculations which do not take into account the effects of
weather and tide on fuel usage.
• This system is not a substitute for other fuel calculations. You should not
rely on the Fuel manager calculations for accurate voyage planning or in
emergency and safety critical situations.
Fuel set up
The fuel manager can be enabled and configured from the [Fuel set up] menu.
1. [Fuel Manager] — Select to enable or disable the fuel manager.
2. [Total fuel capacity] — Sum of total capacity of all your fuel tanks.
3. [Economy units] — Economy units used in data overlays, Side bars or
the Dashboard app.
90