Raymarine LIGHTHOUSE 4, Руководство по эксплуатации

Страница: 54 / 504

Uni-controller
The Uni-controller functions as detailed below.
1. [Directional] — Use the 8-way directional controls to reposition the cursor
onscreen.
2. [OK] — Push the button to confirm a selection.
3. [Rotary] — Turn clockwise to Range or Zoom In and counterclockwise to
Range or Zoom out.
RMK controls
Displays can be controlled remotely using an RMK-9 or RMK-10.
1. [Home] — press to return to the Homescreen.
2. [Menu] — press to access menus. Press again to close menus.
3. [UniController] — provides a rotary control and a joystick that includes an
[OK] push button for using menus and applications.
4. [Back] — press to return to a previous menu or dialog level.
5. [-] (Minus/Negative symbol) — press to range out.
6. [+] (Plus/Positive symbol) — press to range in.
7. [Active] — press to switch the active pane, or to switch the active display
(in multiple display systems).
8. [Waypoint / MOB] — press and release to access the waypoint options.
Press again to place a waypoint. Press and hold to place a Man
Overboard (MOB) marker at your current position.
9. [Standby (Auto)] — press to disengage integrated autopilot, press and
hold to activate Auto mode on integrated autopilot.
10. [Power] — see table below:
Configuration Display State
Momentary
press
Press and hold
Off Not applicable Not applicable Single display
On Open Shortcuts
page
Power off / put
into Standby
All displays Off Not applicable Not applicable
All displays On Open Shortcuts
page on active
display Power down all
displays
Multiple displays
1 display on and
1 display off Open Shortcuts
page on active
display Power down
active display
Note: Displays that are switched off must be switched back on using
the display’s [Power] button.
11. Direction of Joystick Up.
54