Enabling troll control
Troll control is enabled from the troll sidebar. For the troll controls to be
available the engines must be in forward gear and idle.
1. Place the engines in forward gear and ensure they are idle.
2. If no sidebar is displayed, swipe your finger from the left edge of the
screen to the middle.
3. Select the Mercury icon.
4. Select the Troll icon.
5. Use the
[+]
(Plus) and
[-]
(Minus) buttons to adjust your desired engine RPM.
The [+] (Plus) and [-] (Minus) buttons will be deactivated if the minimum or
maximum value has been selected.
6. Select
[Enable]
.
Your engine RPM will now increase to the set level.
If troll is active the troll sidebar icon will be colored amber. Hiding the sidebar
will not affect troll operation.
When enabled you can adjust the engines RPM using the
[+]
(Plus) and
[-]
(Minus) buttons.
Cancelling troll control
To regain manual throttle control troll mode must be cancelled.
Troll control mode can be cancelled by:
• Placing handles in neutral position, or
• Selecting
[Disable]
from the troll sidebar.
23.6 Cruise control
On supported engines and outboards the cruise feature will be available on
the Mercury sidebar.
Controls for the cruise feature are available in the Mercury Cruise sidebar.
The cruise feature enables you to select a specific RPM that your engines will
maintain until cruise is disabled. The RPM speed can be adjusted in 50 RPM
increments using the
[+]
(plus) and
[-]
(minus) buttons on the sidebar.
Enabling cruise control
Cruise control is enabled from the cruise sidebar.
1. If no sidebar is displayed, swipe your finger from the left edge of the
screen to the middle.
2. Select the Mercury icon.
358
Содержание LIGHTHOUSE 4
