Raymarine LIGHTHOUSE 3, Инструкции по продвинутой эксплуатации

Страница: 137 / 450

4. Insert the memory card into your MFD’s card reader.
5. Open the Chart app’s
Cartography selection tab: Chart app > Menu > Settings > Cartography .
6. Select Update S-63 charts .
7. Select the card reader that contains the cumulative update files and if applicable, the new cell
permits file.
The card will be scanned for updates, this process can take some time. Once complete the list of
installed base cells is displayed and any cells that have updates available will be automatically
selected.
8. Select Update selected charts to install all base cells.
9. Select the card reader slot where you want the files to be installed.
Important:
The same ‘Installed charts’ card and memory card slot MUST be used to install and update base
cell files and cumulative update files.
10. Wait for the installation to complete.
A progress bar is displayed as the base cells are installed.
11. Select OK on the successfully imported notification.
Note:
The installation process will create and store chart data in 2 folders on your ‘Installed charts’
memory card: ‘senc’ and ‘seapilot’, Overwriting, deleting or altering these folders or data within
them will render your charts inoperable.
Note:
If errors persist after the installation of cumulative update files contact Raymarine product support
for resolution..
Warning: Expired S-63 Encrypted Charts
S-63 Encrypted Chart cells expire after a set period of time. Once expired the
charts must not be used for navigation. You will be notified onscreen of the
expiration. The charts must be updated before they can be used for navigation.
S-63 Encrypted Chart settings
With the S-63 MFD activation file installed the S-63 Encrypted Charts related settings are available on
the Cartography settings tab.
• Update S-63 charts — This option is used to decrypt your purchased S-63 Encrypted Chart data so
that they can be displayed on the MFD.
• View installed S-63 charts — View a table of all currently installed chart cells
• S-63 settings — Access the following S-63 related settings:
– SD card — Choose external storage location used for the Installed charts.
– User permit — View and save user permits to file,
– SA security certificate — View and update installed SA certificate.
Chart app
137