Raymarine i70, Руководство по эксплуатации

Страница: 66 / 104

8.1 Fuel manager overview
The fuel manager feature displays essential data about the fuel of your vessel.
Fuel manager estimates the amount of fuel onboard, based on you logging each time you fill up,
the total fuel capacity, and how much fuel is burned by the engine(s). This data is used to estimate
the distance and time until fuel depletion. Additionally, fuel manager can display engine fuel flow
rate and economy.
Important:
• To ensure accurate calculations you must record all fuel you add to your fuel tanks using either
the Set all tanks full or Add partial fill settings.
• This system is not a substitute for other fuel calculations. You should not rely on the Fuel
manager calculations for accurate voyage planning or in emergency and safety critical situations.
• Fuel estimates are specific to each display.
The Fuel manager requires the following NMEA 2000 PGNs to be available on your system:
• Fuel Used (PGN 127497), or
• Fuel flow rate (PGN 127489).
.
Detect fuel messages
Fuel manager generates fuel estimates based on Fuel Used (Trip) or Fuel Flow Rate messages.
You can see which of these messages are available on your system from the Fuel Manager’s Set-up
menu ( Menu > Fuel manager > Set-up ):
1. Start your vessel’s engines.
2. Select
Detect fuel messages .
The screen will update to identify which messages are detected.
Note:
After 15 seconds if no message is detected then the status will display “ Not found ”.
8.2 Fuel manager menu
The Fuel manager menu allows you to set up and use the Fuel manager.
• Set all tanks full — Sets all tanks to the maximum value specified in the Total fuel capacity setting.
• Add partial fill — Allows you to add a specific volume of fuel that you have added.
• Fuel Manager: — Enables and disabled the fuel manager calculations.
• Set-up — Set-up information for the Fuel manager.
– About Fuel Manager — View information about the Fuel manager
66