Raymarine i50 Depth, Инструкция по установке и эксплуатации

Страница: 26 / 90

4.4 Transducer connections
i50 Depth connection
D12376-1
2
1
3
Item Cable color Signal name
1 Black Piezoceramic –
2 Blue Piezoc
3
Screen 0 V (shield)
i50 Speed connection
D12390-1
4
5
1
2
3
Item Cable color Signal name
1 Brown Temperature 0 V
2 White Temperature
(signal)
3 Screen Speed 0 V (shield)
4 Green Speed (signal)
5 Red Speed V+
i50 Tridata connection
7
8
4
5
6
D12393-1
2
1
3
Item Cable color Signal name
1
Black (Depth)
Piezoceramic –
2
Blue (Depth)
Piezoc
3
Screen (Depth) 0 V (shield)
4 Brown (Speed) Temperature 0 V
5 White (Speed) Temperature
(signal)
6 Screen (Speed) Speed 0 V (shield)
7 Green (Speed) Speed (signal)
8 Red (Speed) Speed V+
Making transducer connections
Although the transducer cable is fitted with spade
connectors for direct connection to the rear of the
unit, it may be necessary to remove these to facilitate
installation, e.g. if the cable has to be routed through
narrow apertures. 1/8th spade terminals will be
required (not supplied), to replace those removed.
When fitting the new spade connectors, prepare the
cables as detailed below:
3 mm
6 mm 50 mm
1
2
D12359-1
1. Prepare the cable as shown in 1 above.
2. Fold back the wire strands and insert into the new
spade connector as shown in 2 above.
3. Ensure the wire strands do not extend beyond
the rear of the spade connector insulation.
4. Crimp the connector to the wire.
26 i50