Raymarine gS Series, Инструкция по установке и эксплуатации, Страница: 90 / 208

16.15 Depth & Contour options
If supported by your cartography type, the following depth and contour settings are available.
Note: The menu items available are dependant upon your cartography type. The depth options are dependant upon the units
of measure in use on your system.
Menu item Cartography type Description Options
Show Soundings LightHouse
vector charts and
Navionics Determines the depth at which depth
soundings are displayed. • None
• 0–30 ft / 0–10 m / 0–5 fa
• 0–60 ft / 0–20 m / 0–10 fa
• 0–180 ft / 0–50 m / 0–30 fa
• 0–500 ft / 0–150 m / 0–83 fa
• All (default)
Show Contours Navionics Determines whether contours are
displayed. • Off
• 0–6 ft / 0–2 m / 0–1 fa
• 0–18 ft / 0–5 m / 0–3 fa
• 0–30 ft / 0–10 m / 0–5 fa
• 0–50 ft / 0–15 m / 0–8 fa
• 0–60 ft / 0–20 m / 0–10 fa
• All (default)
Shallow Contour
LightHouse charts Determines the depth at which the
Shallow contour is displayed.
The Shallow contour cannot be set to a
value greater than the Safety or Deep
contours.
• Off
• 6 ft / 2 m / 1 fa
• 12 ft / 3 m / 2 fa (default)
• 18 ft / 5 m / 3 fa
• 20 ft / 6 m / 4 fa
• 30 ft / 10 m / 5 fa
• 50 ft / 15 m / 8 fa
• 60 ft / 20 m / 10 fa
Safety Contour LightHouse charts Determines the depth at which the Safety
contour is displayed.
The Safety contour cannot be set to a
value less than the Shallow contour or
higher than the Deep contour. • Off
• 6 ft / 2 m / 1 fa
• 12 ft / 3 m / 2 fa
• 18 ft / 5 m / 3 fa
• 20 ft / 6 m / 4 fa
• 30 ft / 10 m / 5 fa (default)
• 50 ft / 15 m / 8 fa
• 60 ft / 20 m / 10 fa
Deep Contour LightHouse
vector charts and
Navionics Determines the depth at which the Deep
contour is displayed.
The Deep contour cannot be set to a
value less than the Shallow or Safety
contours. • Off
• 6 ft / 2 m / 1 fa
• 12 ft / 3 m / 2 fa
• 18 ft / 5 m / 3 fa
• 20 ft / 6 m / 4 fa
• 30 ft / 10 m / 5 fa
• 50 ft / 15 m / 8 fa (default)
• 60 ft / 20 m / 10 fa
Deep Water Color Navionics Determines the color of deep water. • White (default)
• Blue
Sonar Logs Navionics Allows logging of depth and position
data to your Navionics chart card. This
data will be sent to Navionics to improve
the contour detail of Sonar Charts on
your multifunction display. Refer to the
Navionics website
www.navionics.com
for instructions on how to upload your
sonar logs.
• On
• Off
176
gS Series