Raymarine gS Series Скачать руководство пользователя страница 46

Страница: 46 / 208

14.8 AIS target symbols

Your multifunction display shows a range of symbols to represent
the different types of AIS target.

Target type

Description

Symbol

Transmitting target

Target is moving or at
anchor (Target is not
activated, dangerous
or lost).

Activated target

Target activated —
that is, AIS vector
displayed. Vector
line (optional) shows
predicted distance
travelled within a given
time.

Selected target

Target selected with
cursor. Can view
detailed data.

Dangerous target

Targets within specified
distance (CPA) or time
(TCPA). Dangerous
target alarm sounds if
enabled. Target red
and flashing.

Uncertain target

Calculated CPA / TCPA
value uncertain.

Lost target

When the signal of
a dangerous target
not received for 20
seconds. Target
in latest predicted
position. Alarms
sounds if enabled.
Target flashes.

Buddy target

Target has previously
been added to the
Buddy List.

Aid To Navigation
(AToN) target (Real)

AToN target is ON
position.

Aid To Navigation
(AToN) target (Real)

AToN target is OFF
position.

Aid To Navigation
(AToN) target (Virtual)

AToN target is ON
position.

Aid To Navigation
(AToN) target (Virtual)

AToN target is OFF
position.

Land base station
target

Land base station
target is ONLINE.

Search and rescue
transponders (SARTS)
target

SARTS target

Search and rescue
aircraft (SARS) target

SARS target

Military and law
enforcement target

Only displayed when
connected to approved
STEDS-EAIS AIS
hardware.

14.9 Displaying detailed AIS target
information

From the chart or radar application:

1. Select an AIS target.

The AIS target context menu is displayed.

2. Select

View AIS Data

AIS Data

The table below shows the AIS target information which if
available will be displayed on the multifunction display:

• Type

• Status

• Destination

• Last Seen

• ETA

• MMSI

• Call Sign

• IMO No.

• Length

• Beam

• Draught

• Heading

• ROT

• Position

• COG

• SOG

• CPA

• TCPA

Note:

Available data is dependant upon what information is

being transmitted from the target vessel and the type of AIS
unit connected to your system.

132

gS Series

Содержание gS Series

















































































































































































































Результаты поиска

Содержание gS Series

Отзывы:

Raymarine gS Series, Инструкция по установке и эксплуатации, Страница: 46 / 208

Результаты поиска

Содержание gS Series

Отзывы: