Raymarine gS Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 208

Raymarine gS Series Скачать руководство пользователя страница 20

6.9 Multi-Touch gestures

Raymarine a Series and gS Series multifunction displays support
multi-touch.

Multi-touch means that the display is capable of recognizing
multiple simultaneous touch inputs. This means that you can
use 2 or more fingers on the screen at the same time to perform
multi-touch gestures.

Pinch to Zoom

The pinch to zoom gestures can be performed on multifunction
displays that support multi-touch.

Pinch to zoom consists of 2 actions:

• Move 2 fingers apart to zoom in.

• Move 2 fingers together to zoom out.

0

0

0

0

00

00

D12920-2

Pinch to Zoom can be used in the following applications:

• Chart application.

• Weather application.

6.10 Initial set up procedures

Once your display has been installed and commissioned,
Raymarine recommends that you perform an initial set up
procedure.

Startup wizard

When you power-up the display for the first time or after a
system reset a Startup Wizard is displayed. The wizard guides
you through the following basic configuration settings:

1.

Language

2.

Vessel type

3.

Units of measure

4.

Total fuel capacity

5.

Number of batteries

6.

Number of engines

7.

Number of fuel tanks

Note:

These settings can also be set at any time using the

menus accessible from

Homescreen > Customize

.

Additional settings

In addition to the settings covered by the Wizard, it is also
recommended that the following initial set up tasks are
completed:

• Set your date and time preferences.

• Adjust the display brightness (and set up a shared brightness

scheme if appropriate).

• Designate the data master.

• Select the GPS data source.

• Familiarize yourself with the product using Simulator Mode.

Adjusting the display brightness

1. Press the

POWER

button once.

The Shortcuts menu is displayed.

2. Adjust the brightness to the required level using the

on-screen brightness slider bar control, or

3. Touch the Sun icon to increase the brightness level or the

Moon icon to decrease the brightness level.

Note:

The brightness level can also be increased by pressing

the

Power

button multiple times.

80

gS Series

«
...
18
19
20
21
22
...
»

Содержание gS Series

















































































































































































































Отзывы:

Нет отзывов