Raymarine e7D, Руководство по установке и эксплуатации, Страница: 72 / 270

6.18 Databar status symbols
The status symbols on the databar confirm whether the appropriate
connections to your system have been made.
The symbols show the status for the following:
• Radar scanner.
• AIS receiver / transceiver.
• Sonar (DSM).
• GPS receiver.
• Autopilot.
Radar scanner status symbols
The radar scanner power mode status is indicated in the databar.
Symbol
Radar
power
mode
Description
Transmit
(TX) Rotating icon, signifying that the scanner is
on and transmitting. When SCANNER is
set to ON, select this mode to activate the
scanner. This is the usual mode of operation.
Standby
(STBY) Static icon, indicating that the scanner is on
but not transmitting, and the antenna is not
rotating. The scanner does not transmit and
the radar data is removed from the screen.
This is a power-save mode used when the
radar is not needed for short time periods.
When you return to transmit mode, the
magnetron does not need to warm up again.
This is the default mode.
Off Scanner powered off when radar not required,
but display is in use for other applications,
such as the chart. When selected, the system
counts down. During this time you cannot
re-power the scanner.
Timed
Transmit Scanner switches between on/transmitting,
and standby mode. Scanner goes into power
save mode when constant use of radar is not
required.
AIS status symbols
AIS status is indicated by a symbol in the databar.
Symbol Description
AIS unit is switched on and operating.
AIS currently unavailable.
AIS unit is switched off, or not connected.
AIS unit is in Silent Mode.
AIS unit is in Silent Mode, with active alarms.
Symbol Description
AIS unit is connected and switched on, but has
active alarms.
AIS unit is connected and switched on, but the
dangerous and lost alarm is disabled.
Sonar status symbols
The sonar (DSM) status is indicated in the databar.
Symbol Description
Symbol animated: the DSM is
connected and transmitting.
Symbol static: the DSM is connected
but not transmitting.
Symbol greyed-out: the DSM is not
connected, or is not detected.
GPS status symbols
The GPS receiver status is indicated in the databar.
Symbol Description
A GPS receiver is connected and has
obtained a fix.
A GPS receiver is not connected, or
cannot obtain a fix.
Autopilot status symbols
The autopilot status is indicated in the databar.
Symbol Description
Autopilot is in Standby mode.
Autopilot is in Track mode.
Autopilot is in Auto mode.
No autopilot detected.
Autopilot alarm active.
Dodge mode is active.
Fish mode is active.
Autopilot calibration.
72 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127