Raymarine e7D, Руководство по установке и эксплуатации, Страница: 41 / 270

4.7 Fastheading connection
If you wish to use MARPA (radar target acquisition) functions on
your multifunction display you need either:
• An autopilot connected to the multifunction display via SeaTalk ng
or NMEA 0183. The compass is connected to the course
computer and calibrated via the pilot control head; or:
• A Raymarine or third-party fastheading sensor connected to the
multifunction display via NMEA 0183.
Note: Please contact your dealer or Raymarine technical support
for more information.
4.8 SeaTalk ng connections
The display can connect to a SeaTalk ng system.
The display can use SeaTalk ng to communicate with:
• SeaTalk ng instruments (for example, i70).
• SeaTalk ng autopilots (for example, p70 with SmartPilot SPX
course computer).
• SeaTalk equipment via the optional SeaTalk to SeaTalk ng
converter.
• NMEA 2000 equipment via optional DeviceNet adaptor cables.
Typical SeaTalk ng system
S
S
M
M
A
A
R
R
T
T
P
P
I
I
L
L
O
O
T
T
D 12176-2
12 V / 24 V dc 1 2 V dc + Data
SeaTalk
ng
1 2
6
9 1 0
8 8
5
7
3
4
1. SeaTalk ng instrument — for example, i70.
2. SeaTalk ng pilot control head — for example, p70.
3. Transducer pod.
4. Wind transducer.
5. SeaTalk ng multifunction display.
6. Power supply.
7. SeaTalk ng course computer — for example, SPX-30.
8. Transducer pod.
9. Depth transducer.
10. Speed transducer.
SeaTalk ng power requirements
The SeaTalk ng bus requires a 12 V power supply.
Power may be provided from:
• Raymarine equipment with a regulated 12 V power supply (for
example, a SmartPilot SPX course computer); or:
• Other suitable 12 V power supply.
Note: SeaTalk ng does NOT supply power to multifunction displays
and other equipment with a dedicated power supply input.
Cables and connections 41