Raymarine e7D, Руководство по установке и эксплуатации, Страница: 222 / 270

23.5 Display preferences
You can specify your preference for general display behavior.
Menu item Description Options
Key Beep An audible sound can be made each time a button is pressed or
the touchscreen is used. • ON (default)
• OFF
Cursor Autohide If set to On, the cursor will be automatically hidden after a period
of no movement. If set to Off, the cursor will persist on the
screen until moved. • ON
• OFF (default)
Shared Brightness You can set up shared brightness groups (or “zones”) to adjust
the brightness on multiple units simultaneously. Share Brightness
• ON (default)
• OFF
Brightness Group
• Helm 1 (default)
• Helm 2
• Cockpit
• Flybridge
• Mast
• Group 1
• Group 2
• Group 3
• Group 4
• Group 5
Shared brightness
You can set up shared brightness groups (or “zones”) to adjust the
brightness on multiple units simultaneously.
The following units are compatible with shared brightness groups:
• e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127
multifunction displays
• i70 instruments
• p70 / p70R pilot controllers
• ST70
• ST70+
Once compatible units are added to a shared brightness group,
any brightness adjustment made to any of the units in the group
is also reflected in all other units in that group. An on-screen
single brightness control is available for controlling any units in the
brightness group:
Multiple brightness groups can be configured. This can reflect
the physical location of the units on your vessel if required. For
example, the units at your helm can be set to one group, and the
units on the flybridge can be set to a different group. In this example,
any brightness adjustments made to a unit at the helm would be
automatically reflected in the other units at the helm.
The shared brightness function requires the following:
• All units must be compatible with the shared brightness function
(see list of compatible units above).
• Before a unit can respond to a shared brightness adjustment it
must be assigned to the relevant Brightness Group .
• A single unit can only belong to one brightness group at any one
time.
• The Share brightness setting must be set to ON for all units in
the brightness group.
• When setting up a brightness group an initial Sync brightness
operation must be performed, with all the displays in that group
powered on, to synchronize the display brightness of all units in
the group.
Setting-up shared brightness
With the homescreen displayed:
1. Select Customize .
2. Select Display Preferences .
3. Select Shared Brightness .
4. Select the ON option for the Shared brightness menu item.
5. Select Brightness Group .
6. Select an appropriate brightness group.
7. Repeat the process for the other displays you want in the
brightness group. If the display is not a multifunction display,
refer to the documentation that accompanies the unit for
instructions on setting-up shared brightness.
8. Once all required displays have been added to the same
brightness group, select Sync Brightness on the multifunction
display.
A shared brightness message is displayed.
9. Ensure all displays in the brightness group are powered on.
10. Select Sync .
A message is displayed confirming that the brightness levels of
all displays in the group are now synchronized.
222 e7 / e7D / e95 / e97 / e125 / e127 / c95 / c97 / c125 / c127