Raymarine e7D, Руководство по установке и эксплуатации, Страница: 219 / 270

23.2 Boat details
You can customize various aspects of the display’s functions to make them specific to your vessel.
Menu item Description Options
Boat Type You can change the appearance of the vessel in the chart
application. Select the option that most closely resembles the
type and size of your vessel.
Note: When boat type is selected during the initial set up
of the multifunction display the boat type shall determine the
datapage configuration in the data application.
• Power Cruiser 1 (default)
• Power Cruiser 2
• Power Cruiser 3
• Inboard Speed Boat
• Outboard Speed Boat
• Workboat
• RIB
• Sail Cruiser
• Race Sail
• Catamaran
• Sport Fishing
• Pro Fishing
Minimum Safe Depth Allows you to specify the hull clearance required by your vessel.
Hull clearance information is used by the tide graphs in the chart
application to display the times at which the tide will go above
or below a safe depth for your vessel’s hull. If the tidal water
depth is too low for your hull you risk damaging or grounding
your vessel.
Note: Raymarine recommends adding some contingency
from the actual hull clearance to the value selected.
• 1.0 to 33.0 (if Depth Units preferences set to Feet)
• 0.5 to 10.0 (if Depth Units preferences set to
Meters)
• 0.1 to 5.0 (if Depth Units preferences set to
Fathoms)
Customizing the vessel icon
With the homescreen displayed:
1. Select Customize .
2. Select Boat Details .
3. Select Boat Type .
4. Select the icon that most closely resembles your vessel type
and size.
Setting the vessel minimum safe depth
You can change the appearance of the vessel in the chart
application.
With the homescreen displayed:
1. Select Customize .
2. Select Boat Details .
3. Select Minimum Safe Depth .
4. Use the rotary to adjust the setting as appropriate. The units
for the depth measurement are based on those specified in
the
Homescreen > Customize > Units Set-up > Depth Units
menu.
Customizing your display
219