Raymarine e7D, Руководство по установке и эксплуатации, Страница: 175 / 270

Datapage Default Data Items
Engine 2 • Oil Pressure 1
• Coolant Temperature 1
• Coolant Temperature 2
• Oil Pressure 2
• RPM 1
• Trim Tabs
• RPM 2
• Total Fuel
• Rudder
• SOG
Engine 3
• Coolant Temperature 1
• Coolant Temperature 2
• Coolant Temperature 3
• RPM 1
• RPM 2
• RPM 3
• Total Fuel
• Rudder
• SOG
Note: Datapage selection is a local setting, and therefore only
affects the individual display that you are currently using. It does
not affect any networked displays.
15.3 Customizing the data application
You can customize the data application to show the system and
instrument data that you require.
In addition to displaying the default, pre-configured datapages in the
data application, you can also:
• Change the order datapages appear.
• Customize datapages content to your specific requirements.
• Rename the datapages.
• Add new custom datapages.
• Delete existing datapages.
• Set the number of engines your vessel has (1 — 3).
• Set the maximum engine RPM range.
• Change page color theme and dial color.
• Reset all pages to default.
Changing datapage order using touch
You can change the order that datapages appear.
This only applies to HybridTouch displays.
From the data application:
1. Scroll to the datapage you want to move.
2. Select
Menu .
3. Select Edit Page .
The edit page menu is displayed.
4. Select Move Page Up or Move Page Down .
Each time move page up or move page down is selected
the datapage will be moved 1 space up or down in the data
application.
Changing datapage order
You can change the order that datapages appear.
From the data application:
1. Using the
Rotary Control or Joystick scroll to the datapage
you want to move.
2. Select Menu .
3. Select Edit Page .
The edit page menu is displayed.
4. To move a datapage up:
i. Select Move Page Up .
ii. Press the Ok button to confirm.
5. To move a datapage down:
i. Select Move Page Down .
ii. Press the Ok button to confirm.
Each time move page up or move page down is selected and
confirmed the datapage will be moved 1 space up or down in the
data application.
Customizing datapage content
From the data application:
1. Select
Menu .
2. Select Edit Page .
3. Select the cell you want to change.
4. Select
Select Data Category .
5. Select a data category.
Selecting a data category will display a list of data items for
that category.
6. Select the data item you want to display.
Once selected a tick will be placed next to the data item in the
menu and the cell on screen will display the new data item
7. Repeat steps 3 to 6 for all the data items you want to change.
List of data items
Data items can be displayed in datapage cells.
The following table shows the data items available by category.
Using the data application
175