Raymarine E70498, Руководство по установке

Страница: 10 / 100

Warning: Quantum Wi-Fi connection
During installation there will usually be structure that affects the Wi-Fi signal.
Before using the Radar for navigation, ensure you test the reliability of your Wi-Fi
connection in open waters and away from any other vessels or structure.
Caution: Service and maintenance
This product contains no user serviceable components. Please refer all
maintenance and repair to authorized Raymarine dealers. Unauthorized repair
may affect your warranty.
Transmitted power density levels
• A power density level of 10 W/m 2 does not occur at any point.
• A power density level of 100 W/m 2 does not occur at any point.
IEEE statement
IEEE C95.1 – 2005 – Standard for Safety Levels with respect to Human Exposure to Radio Frequency
Electromagnetic Fields, 3 kHz to 300 GHz.
ICNIRP Guidelines
When properly installed and operated, the use of this Radar conforms to: ICNIRP Guidelines 1998 -
International Commission on Non-Ionising Radiation Protection: Guidelines for limiting exposure to
time-varying electric, magnetic and electro-magnetic fields (up to 300 GHz) 1998.
Water ingress
Water ingress disclaimer
Although the waterproof rating capacity of this product meets the stated IPX standard (refer to the
product’s
Technical Specification
), water intrusion and subsequent equipment failure may occur if
the product is subjected to commercial high-pressure washing. Raymarine will not warrant products
subjected to high-pressure washing.
Disclaimer
Raymarine does not warrant that this product is error-free or that it is compatible with products
manufactured by any person or entity other than Raymarine.
Raymarine is not responsible for damages or injuries caused by your use or inability to use the
product, by the interaction of the product with products manufactured by others, or by errors in
information utilized by the product supplied by third parties.
EMC installation guidelines
Raymarine equipment and accessories conform to the appropriate Electromagnetic Compatibility
(EMC) regulations, to minimize electromagnetic interference between equipment and minimize the
effect such interference could have on the performance of your system
Correct installation is required to ensure that EMC performance is not compromised.
Note: In areas of extreme EMC interference, some slight interference may be noticed on the
product. Where this occurs the product and the source of the interference should be separated
by a greater distance.
For optimum EMC performance we recommend that wherever possible:
10