Raymarine E70085 Dragonfly Скачать руководство пользователя страница 34

Страница: 34 / 96

6.1 Display power

Powering the display on

1. Press and hold the

POWER

button until a beep is heard.

After approximately 5 seconds the splash screen is displayed.

2. Press

to acknowledge the Limitations of Use disclaimer

when it appears.

Powering the display off

1. Press and hold the

POWER

button until the countdown

reaches zero.

Note:

If the

POWER

button is released before the countdown

reaches zero, the power off is cancelled.

6.2 Controls

D12631 -2

MicroSD card reader

– open the card door to insert or remove

a MicroSD card. The card reader is used for electronic charts,
archiving waypoint and track data and user settings.

UniControl

– provides a rotary control, joystick and an OK push

button for navigating menus and applications and selecting items.

Back / View switcher button

• Press once to return to a previous menu or application state.

• Press in the Chart application to exit cursor mode and centre

the vessel on-screen.

• Press in the Sonar or DownVision applications to resume

scrolling from a paused state.

• From the top level application state (Motion mode or Scrolling

mode) press once to open the View switcher.

Power / Shortcuts button

• Press once to power the unit on.

• When turned on, pressing the power button will display the

Shortcuts page.

• Press and hold to turn the display off.

UniControl

The UniControl consists of Rotary, Joystick and push button
controls.

Dragonfly

Содержание E70085 Dragonfly

































































































Результаты поиска

Содержание E70085 Dragonfly

Отзывы:

Похожие инструкции для E70085 Dragonfly

Бренды по названию

Популярные бренды

Raymarine E70085 Dragonfly, Руководство по эксплуатации

Результаты поиска

Содержание E70085 Dragonfly

Отзывы:

Похожие инструкции для E70085 Dragonfly

Бренды по названию

Популярные бренды