Raymarine E70061, Инструкция по установке и эксплуатации

Страница: 28 / 62

5.4 Selecting a transducer location
Wind vane transducer / rotavecta location
requirements
When selecting a location for your wind transducer it is important
to consider a number of factors.
The transducer's location must:
• Allow reasonable access for installation and servicing.
• Be as high as possible and away from any equipment which
may shield the transducer or otherwise disturb the air flow.
• Provide a horizontal mounting surface. If a surface (e.g.
mast top) is otherwise suitable but not horizontal, make up
a suitable wedged packing piece to provide the necessary
horizontal surface.
• There must also be a viable route for the transducer cable to
be routed to the instrument display.
Wind vane transducer and rotavecta
mounting
Ensure that the wind transducer or rotavecta is installed in
accordance with the instructions supplied with the unit.
28 i60